EACR1420SC 电流传感器 Eaton Corporation - Sensors 伊顿
- 产品品牌:Eaton Corporation - Sensors 伊顿
- 产品类别:电流传感器
- 产品型号:EACR1420SC
详细信息
EACR1420SC 电流传感器特性
- 真有效值输出-真有效值技术对失真的波形(如VFD或SCR输出)是准确的
- Jumper-Selectable Ranges — Reduces inventory and eliminates zero and span
- Isolation — Output is magnetically isolated from the input for safety and elimination of insertion loss (voltage drop)
- UL、C-UL和CE认证-全球认可
- VFD Controlled Loads — Monitoring VFD output indicates how the motor and attached load are operating
- SCR Controlled Loads — Accurate measurement of phase angle fired or burst fired (time proportioned) SCRs, with faster current measurement than temperature sensors
- Switching Power Supplies and Electronic Ballasts — True RMS sensing is the most accurate way to measure power supply or ballast input power
- True RMS Output — True RMS technology is accurate on distorted waveforms like VFD or SCR outputs
- 跳线可选范围-减少库存,消除零点和量程
- UL, C-UL and CE Approved — Accepted worldwide
- 开关电源和电子镇流器-真有效值传感是测量电源或镇流器输入功率的最精确方法
EACR1420SC 电流传感器描述
- 伊顿电气公司的CurrentWatch EACR系列电流传感器系列将电流传感器和CTRUE RMS u201d信号调节器组合成一个单独的组件。EACR系列可在VFD或可控硅输出波形失真的情况下提供真实的有效值输出,并可在不稳定的电力环境下提供线性负载。提供实心或分芯外壳。,有关CurrentWatch EACR系列的典型应用,请参阅下面的列表。,产品特性,典型应用
EACR1420SC 电流传感器技术参数
规格项 | 参数值 |
性 能 | |
精度 | 1 %FS |
特 性 | |
响应时间 | 600000 µs |
电 气 | |
电压 | 4 to 20 volts |
电流类型 | DC Current |
测量范围 | 10 to 50 amps |
电源要求 | DC Powered |
电气输出 | Outputs an analog current signal |
环 境 | |
工作温度 | -4 to 122 F (-20 to 50 C) |
物 理 | |
安装/配置 | Panel Mount |
更多技术信息 | |
环路类型 | Open Loop |
审批 / 认证 | UL; CE, CUL |
更多规格 | |
产品类别 | Current Sensors |